Responsive Menu Icon
Search Button
 

Type II Point of use Laboratory Water Purification Systems for Tap Water

alt

Type II water is routinely used for general lab use and to wash and rinse glassware either manually or in the final rinse cycle of an automatic glassware washer. AQUA SOLUTIONS Type II reagent grade Lab Water Systems produce greater than 2 megohm-cm DI water that meets or exceeds ASTM, CAP and CLSI standards for Type II water.

To eliminate the cost and inconvenience associated with traditional "Service DI" these Type II Laboratory Water Purification Systems are designed from the ground up to be user-installable and user-serviceable! They feature quick connect fitting, an easy to read purity light, and a spare DI tank.

Single and Dual module versions are available for a variety of applications that require Type II DI water at flow rates of 5-12 LPM. They are also available as higher-flow, high-capacity "DW" systems for glassware washers that require flow rates of 20-40 LPM. Our RODI systems include built-in reverse osmosis pre-tretment to lower operating cost and feature continuous recirculation to maintain maximum water purity.

Please select one of the lab water systems listed below for detailed product specifications and additional information.
You can narrow your search results by choosing specific system attributes in the "Refine your search" column on the left.

Basic Type II DI Systems


Model Number DI Production Flow Rate Resistivity @ 25 °C Feed Water Storage Capacity RO Production
2635S3 6 LPM6 LPM>2 MΩ-cmTap or ROXX
2618S1 5 LPM5 LPM>2 MΩ-cmTap or ROXX
2618S2 5 LPM5 LPM>2 MΩ-cmTap or ROXX
2635S1 6 LPM6 LPM>2 MΩ-cmTap or ROXX
2635S2 6 LPM6 LPM>2 MΩ-cmTap or ROXX

High Flow Type II DI Systems


Model Number DI Production Flow Rate Resistivity @ 25 °C Feed Water Storage Capacity RO Production
2635S3-08 8-12 LPM8-12 LPM>2 MΩ-cmTap or ROXX
2635S2-08 8-12 LPM8-12 LPM>2 MΩ-cmTap or ROXX
2635S1-08 8-12 LPM8-12 LPM>2 MΩ-cmTap or ROXX

Type II RO+DI Systems


Model Number DI Production Flow Rate Resistivity @ 25 °C Feed Water Storage Capacity RO Production
RODI-2000-03T2 8-12 LPM8-12 LPM2-15 MΩ-cmTap WaterRO, 200-Liter2-GPM
RODI-2000-01T2 8-12 LPM8-12 LPM2-15 MΩ-cmTap WaterRO, 200-Liter1-GPM
RODI-T2 5 LPM5 LPM2-15 MΩ-cmTap waterRO, 42-Liter10-LPH
RODI-T2-H 5 LPM5 LPM2-15 MΩ-cmTap WaterRO, 42-Liter20-LPH

High Flow Type II DI Systems For Glassware Washers


Model Number DI Production Flow Rate Resistivity @ 25 °C Feed Water Storage Capacity RO Production
2635S2-DW 6 LPM40 LPM>2 MΩ-cmTap or RODI, 130-LiterX
RODI-2000-03-T2DW 8-12 LPM40 LPM2-15 MΩ-cmTap WaterRO, 200-Liter2-GPM
2635S2-DW11 6 LPM20 LPM>2 MΩ-cmTap or RODI, 42-LiterX
RODI-T2-DW 5 LPM40 LPM2-15 MΩ-cmTap WaterRO, 42-Liter10-LPH
RODI-T2-H-DW 5 LPM40 LPM2-15 MΩ-cmTap WaterRO, 42-Liter20-LPH
RODI-2000-01-T2DW 8-12 LPM40 LPM2-15 MΩ-cmTap WaterRO, 200-Liter1-GPM
2618S2-DW11 5 LPM20 LPM>2 MΩ-cmTap or RODI, 42-LiterX

Hydrogen Generators


Model Number DI Production Flow Rate Resistivity @ 25 °C Feed Water Storage Capacity RO Production
H-01-C 0.35 LPM0.35 LPM2-15 MΩ-cmTap or ROXX
H-40-C 2 LPM2 LPM2-15 MΩ-cmTap WaterRO, 10-Liter10-LPH
H-40-C-H 2 LPM2 LPM2-15 MΩ-cmTap WaterRO, 42-Liter10-LPH