Model: RODI-2000-01AL - High Flow Low TOC Type I Analytical Grade RO+DI System
The 1-GPM reverse osmosis portion of this system reduces operating costs by economically removing ~97% of the contaminants from the incoming tap water. The RO water is stored in an included 200-Liter pressurized tank that prevents the risk of airborne contamination and eliminates the need for additional feed pumps and tank filters. The system is mounted on a welded aluminum frame and includes a built-in three stage pre-filter assembly.
The Type I portion of this system produces 18.2 megohm-cm ultrapure, reagent grade water at a flow rate of 8-12 Liters/minute and features continuous recirculation to maintain maximum water purity. Therefore, pure water is instantly available on demand. A built-in dual wavelength UV Oxidizer/Sterilizer reduces TOC levels, prevents the growth of microorganisms within the system, and alerts you when it is time to change the UV lamp. The system can be setup to feed a single dispensing point or multiple dispensing points via a small (200 linear foot) circulation loop. A variety of optional faucets, valves, and dispensers are available for use with the system. A digital Conductivity/Resistivity monitor displays the water quality and a Green LED indicates that the water quality is above the acceptable purity. When the water quality drops below the desired purity, a Red LED alerts the user that it is time to replace the filters.
This affordable lab water system is simple to install and easy to maintain. It features fully automatic operation, has a 1-year warranty, and is proudly made in the USA.
A higher production 2-Gallon/minute versions of this system is also available (see Model: RODI-2000-03AL).
This combination Reverse Osmosis and Type I DI System is for operation on virtually any quality tap water that contains less than 1000 PPM total dissolved solids.
All AQUA SOLUTIONS Analytical Grade Type I DI Laboratory Water Purification Systems produce purified water that meets or exceeds ASTM, CAP and CLSI specifications for Type I reagent grade water.
Features and Benefits:
- Dual wavelength reduces TOC levels to
- 6,000 - 12,000 Grains as CaCO3 to a 0.02-Megohm end point
- Continuous recirculation is used to ensure water quality and prevent the growth of microorganisms
- Dispensing value included.
- 0.22-micron (absolute) capsule - Part# - DC2022
- One (1) year warranty
- Made in USA
Pure Water Specifications
|18.2 Megohm-cm - Ultrapure |
|0.056 MicroSeimens/cm - Ultrapure |
|Analytical - Meets or exceeds ASTM, CAP, CLSI, and USP Specifications for Type I Water |
|< 10-PPB - A built in dual wavelength UV Oxidizer/Sterilizer reduces TOC levels to |
|8-12 Liters/minute |
|< 1/ml (less than 0.22 micron) |
| - |
RO Water Specifications
|RODI2-200: 200-Liter Pressurized Tank - Diameter - 26" (660 mm) Height - 48" (1,219 mm) |
|For Operation on any quality tap water containing less than 1,000 PPM of total dissolved solids |
|User supplied 3/4" line with 1/2" or 3/4" valve |
|3/4” NPTF or NPTM |
|Ultrafilter - Removes Pyrogen, Endotoxin, RNase & DNase |
|One (1) Part # CR4040-HF4 |
|Width - 36" (914mm), Depth - 19" (482mm) Height - 48" (1,219mm) |
|280 lbs (127 kg) Systems/Frame only |
|120 or 240 VAC - 15%+10%, 50/60 Hz. 25 Watts |
|35 PSI (2.4 bar) |
|100 PSI (6.6 bar) |
|500-600 lbs (227-272 kg) |
|20" 75/25-micron prefilter |
|20" 5-micron prefilter |
|20" 3-micron activated carbon |
|High Flow, Low Pressure TFC Membrane |
|Required Purification Kit - Includes a 2635TO High purity, High capacity DI module and aa DC2022 0.22-Micron Final Filter |
|Required Purification Kit - Includes two 2635TO High purity, High capacity DI modules and a DC2022 0.22-Micron Final Filter |
|0.22-Micron Final Filter |
|UV Oxidizer Lamp |