Model RO2003 Standard System
A single RO system can be used to pretreat the tap water feed for several Type I or Type II DI lab water purification systems, and/or point-of-use locations.
A Reverse Osmosis System should be considered under the following circumstances: Incoming tap water contains more than 170 parts per million (ppm) of total dissolved solids. DI water usage exceeds 40 liters per day on a Type II DI System. DI water usage exceeds 20 liters per day on a Type I DI System. There are two criteria to consider when determining if a reverse osmosis pretreatment system is either required, or can be justified, based on cost savings: Can the DI system alone produce the desired quality and quantity of purified water that is needed for the applications at hand? IF NOT, AN RO PRETREATMENT SYSTEM IS REQUIRED. Would it cost more overall (including capital and operating costs over 1-3 years), to process the tap water via DI alone, or with a combination of RO plus DI?
IF DI ALONE COSTS MORE, AN RO SYSTEM IS JUSTIFIED.
This system is also available for a high flow, high capacity applications: Model RO2000-04.
This compact Laboratory Reverse Osmosis ("RO") System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS. It economically produces 30-Liters/hour of RO purified water by removing >95% of the contaminants in the incoming tap water.The system includes a built-in, high-capacity activated carbon pre-filter and a 130-Liter pressurized tank to store the RO purified water
AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems include a pressurized RO storage tank, which eliminates the need for level controls, overflow piping, and transfer pumps.
Features and Benefits: RO production is 30-Liters Per Hour. Includes 130-Liter pressurized storage tank reduces the risk of contamination and eliminates the need for a transfer pump. Built-in 0.1-Micron Activated Carbon Pre-filter. Made in the USA. The System has a built in TDS Meter to monitor water quality. One (1) year warranty. This item is on our GSA Contract # GS-07F-5799R. Pure Water Specifications
>2-Megohm-cm at 25°C >0.500 MicroSeimens/cm at 25°C Type II 3-LPM Feed Water
Tap water containing 1,000 PPM of TDS User supplied 1/4" or 3/8" NPTF valve (3/8" Tube X 1/4" NPTM & 3/8'" Tube X 3/8" NPTM fittings included with system) 1/4" Tube fitting (20 ft. of 1/4" of tubing supplied with system) Features and Benefits
30-Liters Per Hour The included 130-Liter pressurized storage tank reduces the risk of contamination and eliminates the need for a transfer pump. Built-in 0.1-Micron Activated Carbon Made in the USA The System has a built in TDS Meter to monitor water quality. 1 Year This item is on our GSA Contract # GS-07F-5799R Optional Upgrades
10" Pre-filter assembly with 5-Micron sediment filter 10" Anti-Scaling Prefilter Assembly Remote Dispenser kit - non-recirculating type - with 0.1 micron final filter capsule Remote Dispenser kit - non-recirculating type - no final filter capsule 1 inch 0.1-Micron (absolute) Final Filter Capsule 2 inch 0.1-Micron (absolute) Final Filter Capsule High flow 0.22-Micron (absolute) Filter Capsule UV Sterilizer - Prevents the growth of microorganisms within the system. Tank upgrade: Increases storage capacity from 130 to 200 Liters Tank upgrade: Increases storage capacity from 42 to 200 Liters 200-Liter pressurized storage tank with valve assembly System Specifications
Three (3) Part # CR1812H1 Width - 20 in (508 mm), Depth - 12 in (305 mm) Height - 20 in (508 mm) Bench, Shelf, or Wall (no additional charge) 75 - 100 lbs (34 - 45 kg) cabinet only Requires a 120 VAC electrical outlet within 5’ of the right side of the system. 25 PSI (1.7 bar) 100 PSI (6.6 bar) 100-150 lbs (45 - 68 kg) Consumables
10" 1-Micron Activated Carbon Prefilter 0" 5-Micron Sediment Pre-Filter - For use with optional CH1004-PF (3) 12" TFC Reverse Osmosis Replacement Cartridge