This system produces 18.2 Megohm-cm type I ultrapure, reagent grade water that is free of Pyrogen, Endotoxin, RNase and DNase at a flow rate of 8-12 Liters/minute. The unit is ulitized in operations using pretreated feed water that contains less than 20 PPM of total dissolved solids. This laboratory water purification system includes a built-in 5,000 MWCO ultrafilter cartridge and a built-in dualwavelength UV Oxidizer/Sterilizer that reduces TOC levels to < 5 PPB, for microorganism growth prevention within the system.
More Information
All AQUA SOLUTIONS Biological Grade Type I DI Laboratory Water Purification Systems produce purified water that meets or exceeds ASTM, CAP and CLSI specifications for Type I reagent grade water.
Ultrafilter removes Pyrogen, Endotoxin, RNase and DNase
High ion exchange capacity (6,000 Grains) CaCO3 to a 0.02-Megohm end point
Dual wavelength reduces TOC levels to < 5 PPB and prevents the growth of microorganisms within the system
Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system
Ultrapure water available on demand up to 7 ft. (2 meters) from the system via the included hand held dispenser- Part # 2700R
Final filtration of 0.22 µm (absolute) capsule
Two (2) year system warranty (US & Canada only)
This item is on our GSA Contract # GS-07F-5799R
Made in USA
Pure Water Specifications
Resistivity
18.2 Megohm-cm - Ultrapure
Conductivity
0.056 MicroSeimens/cm - Ultrapure
Ultrapure Grade Details
Biological - Meets or exceeds ASTM, CAP, CLSI, and USP Specifications for Type I water
TOC
< 5-PPB - A built in dual wavelength UV Oxidizer/Sterilizer reduces TOC levels to
Flow Rate Details
8-12 Liters/minute
Particulates
0.1-Micron
Bacteria
< 1 cfu/ml
Pyrogen/Endotoxin
< 0.001 EU/ml
RNase
< 0.01 ng/ml
DNase
< 4 pg/µL
Flow Rate
8-12 LPM
Feed Water
Feed Water Quality
For operation on water that has been pretreated via reverse osmosis, distillation or deionization by a central or point-of-use pretreatment system, and contains less than 20 PPM of TDS (total dissolved solids)
Water Connection
User supplied 1/2" NPTF valve (1/4" Tube X 1/2" NPTM fittings included with system)
Inlet Connection
1/2" Tube fitting (20 ft. of tubing supplied with system)
Optional Upgrades
UV2006S-2
Dual wavelength UV Oxidizer/Sterilizer - Reduces TOC levels to
UV2006X-2
Dual wavelength UV Oxidizer/Sterilizer - Reduces TOC levels to
System Specifications
Cabinet Dimensions
Width - 20 in (508 mm), Depth - 12 in (305 mm) Height - 20 in (508 mm)
Mounting
Bench, Shelf, or Wall (no additional charge)
Operating Weight
75 - 100 lbs (34 - 45 kg) cabinet only
Input Power
Requires one 100-240 AC, 50/60Hz, 1.0A grounded receptacle within 5' of the right side of the system cabinet
System Power Source
Switching power supply - 12 VDC at 2.5 Amps
Minimum Inlet Pressure
30 psi (2 bar)
Maximum Inlet Pressure
100 PSI (6.6 bar)
Total shipping weight
50 lbs (23 kg)
Consumables
2635M2L
Required Purification Kit - Includes two 2613TO High purity, High capacity, Low TOC DI modules, a CC1050 Carbon Pre-filter, and a DC2022 0.22-Micron Final Filter
