Type II Point of use Laboratory Water Purification Systems for Pre-treated Water

alt

Type II water is routinely used for general lab use and to wash and rinse glassware either manually or in the final rinse cycle of an automatic glassware washer. AQUA SOLUTIONS Type II reagent grade Lab Water Systems operate on tap water or pre-treated RO water and produce greater than 2 megohm-cm DI water that meets or exceeds ASTM, CAP and CLSI standards for Type II water.

To eliminate the cost and inconvenience associated with traditional "Service DI" these Type II Laboratory Water Purification Systems are designed from the ground up to be user-installable and user-serviceable! They feature quick connect fitting, an easy to read purity light, and a spare DI tank.

Single and Dual module versions are available for a variety of applications that require Type II DI water at flow rates of 5-12 LPM. They are also available as higher-flow, high-capacity "DW" systems for glassware washers that require flow rates of 20-40 LPM.

Please select one of the lab water systems listed below for detailed product specifications and additional information.
You can narrow your search results by choosing specific system attributes in the "Refine your search" column on the left.

Basic Type II DI Systems


Model Number DI Production Flow Rate Resistivity @ 25 °C Feed Water Storage Capacity RO Production
2618S1 55>2 MΩ-cmTap or ROXX
2618S2 55>2 MΩ-cmTap or ROXX
2635S1 66>2 MΩ-cmTap or ROXX
2635S2 66>2 MΩ-cmTap or ROXX
2635S3 66>2 MΩ-cmTap or ROXX

High Flow Type II DI Systems


Model Number DI Production Flow Rate Resistivity @ 25 °C Feed Water Storage Capacity RO Production
2635S1-1/2 8-128-12>2 MΩ-cmTap or ROXX
2635S2-1/2 8-128-12>2 MΩ-cmTap or ROXX
2635S3-1/2 8-128-12>2 MΩ-cmTap or ROXX