An AQUA SOLUTIONS RO system can effectively remove up to >95% of the contaminants in tap water, thereby reducing the operating cost of a DI system by more than 90-95%.
A single RO system can be used to pretreat the tap water feed for several Type I or Type II DI laboratory water purification systems, and/or point-of-use locations.
A Reverse Osmosis System should be considered under the following circumstances:
Incoming tap water contains more than 170 parts per million (ppm) of total dissolved solids.
DI water usage exceeds 40 liters per day on a Type II DI System.
DI water usage exceeds 20 liters per day on a Type I DI System.
This Reverse Osmosis ("RO") System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS. The system produces RO purified water at the rate of 1,500 - 2,000 GPD (~1 - 1.4 GPM or 3.8 - 5.3 LPM) and economically removes >95% of the contaminants in the incoming tap water. The system has a built-in three stage sediment and activated carbon pre-filter assembly.
More Information
AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems include a pressurized RO storage tank, which eliminates the need for level controls, overflow piping, and transfer pumps.
Features and Benefits:
RO production is 1-Gallon Per Minute.
Built-in 3 Stage Pre-Filter Assembly: Includes 75/25-Micron Sediment, 5- Micron Sediment, & a 3-Micron Activated Carbon.
Made in the USA.
The sensor displays a Green LED when water quality is >2-Megohm-cm and a Red LED flashes when it’s time to change DI Modules.
One (1) year warranty.
This item is on our GSA Contract # GS-07F-5799R.
Pure Water Specifications
Resistivity 25°C:
>2-Megohm-cm at 25°C
Conductivity
>0.500 MicroSeimens/cm at 25°C
Pure Water Grade
Type II
Flow Rate Details
3-4 LPM
Feed Water
Feed Water Quality
Tap water containing 1,000 PPM of TDS
Water Connection
User supplied 1/4" or 3/8" NPTF valve (3/8" Tube X 1/4" NPTM & 3/8'" Tube X 3/8" NPTM fittings included with system)
Inlet Connection
3/4” NPTF.
Features and Benefits
RO Production
1-Gallon Per Minute
Pre-Filter
Built-in 3 Stage Pre-Filter Assembly: Includes 75/25-Micron Sediment, 5- Micron Sediment, & a 3-Micron Activated Carbon
Country of Origin
Made in the USA
TDS Monitor Details
The System has a built in TDS Meter to monitor water quality.
Warranty
1 Year
GSA
This item is on our GSA Contract # GS-07F-5799R
Optional Upgrades
CH1004-PF
10" Pre-filter assembly with 5-Micron sediment filter
2700N-NFC
Remote Dispenser kit - non-recirculating type - no final filter capsule
DC2002
1 inch 0.1-Micron (absolute) Final Filter Capsule
DC2004
2 inch 0.1-Micron (absolute) Final Filter Capsule
DC2022
High flow 0.22-Micron (absolute) Filter Capsule
UV2006S
UV Sterilizer - Prevents the growth of microorganisms within the system.